Installing The Optional Mounting Bracket - Stryker SMRT Power System 6500 Manuel D'utilisation Et D'entretien

INSTALLING THE OPTIONAL MOUNTING BRACKET

English
WARNING
• For ambulance installation, a certified mechanic that is familiar with
ambulance requirements should install the optional mounting bracket and
the SMRT Charger. Improper SMRT Charger installation may cause injury to
the patient or operator and/or damage to the SMRT Charger or SMRT Pak.
• When charging a SMRT Pak in an ambulance, locate the SMRT Charger in
an enclosed cabinet and out of patient reach during transport.
To install the optional mounting bracket (Figure 2):
1. Use the SMRT Charger mounting bracket as a template to mark the location
of the mounting holes at the area where the mounting bracket will be
installed.
Return To Table of Contents
1-16
Charger Installation
Spring
Tab
Figure 2: Mounting Bracket
6500-109-105 REV A
Charger
Mounting Points
www.stryker.com