Turning Low Air Loss (Lal) On Or Off; Viewing And Clearing History - Stryker InTouch Critical Care Bed Manuel D'exploitation

English

Turning Low Air Loss (LAL) on or off

EN
To turn LAL on, tap LAL at the top of the Support Surface display
To turn LAL off, tap LAL at the top of the Support Surface display
Notes
• Active LAL is orange. Inactive LAL is white.
• The LAL status is ON by default.

Viewing and clearing history

The Therapy History screen provides details about the therapies that were performed for a patient. This information
resets when you tap New Patient (see
1-78 on page 1-74).
To view therapy history, tap Therapy History (see
right of the screen to scroll through the report (see
To clear therapy history, tap Clear History.
To exit therapy history, tap X or tap Therapy History.
1-74
Operation
(Figure 1-75 on page
Figure 1-75: Low Air Loss On
(Figure 1-76 on page
Figure 1-76: Low Air Loss Off
Preparing Isolibrium for a new patient on page
Figure 1-77 on page
Figure 1-78 on page
Figure 1-77: Therapy history button
2141-800-1 07 REV A
1-74).
1-74).
1-57) or Clear History (see
1-74). Tap the up and down arrows to the far
1-74).
Figure 1-78: View history or clear history
Figure
www.stryker.com