Stryker InTouch Critical Care Bed Manuel D'exploitation page 15

Specifications (Continued)
Zoom®
Speed
motorized drive
• Forward
(Model 2141)
• Backward
(option)
Without optional auxiliary outlet (120 V
Maximum
only)
currency
With optional auxiliary outlets (120 V
consumption
only)
All electrical requirements meet CSA
Electrical
C22.2 No. 601.1, UL 60601-1 and IEC
requirements
60601-1.60 601-2-38 specifications
802.11 b/g, 2.4 GHz
• Minimum operational signal strength: -65 dB
• Supported security protocols:
WEP
WPA-PSK (TKIP)
iBed Wireless
radio ( optional)
WPA2-PSK (CCMP/AES)
WPA2-Enterprise (Only with PEAP-MS-CHAPv2)
802.1x
• PEAP-MS-CHAPv2 (Without certificate)
• Supports IPv4 and DHCPv4
12 V, 17.6 Ahr, sealed lead-acid battery (part number QDF9188)
3.0 V 220mAh lithium battery, size 20mm - Varta Int. CR2032
Battery
Coin cell PC battery holder, size 20mm - MDP Int. BA2032
Note: For Isolibrium specifications, see the Isolibrium operations/maintenance manual.
Recommended Mattress Size
With Bed Extender DM64196
®
(PositionPRO and
Isolibrium™) (35 in. x 6 in. x 4 in.)
With Bed Extender DM64197
(XPRT™) (35 in. x 6 in. x 5.5 in.)
www.stryker.com
Introduction
• 2.98 mph
• 1.79 mph
4.0 Amps
9.8 Amps
• 120 ± 10% V , 50/60Hz - two 250V, 10A fuses
• 120 V , 50-60Hz, 4.0A (9.8A with 120V optional
auxiliary outlet) - two 250V, 10A fuses
35 in. x 84 in. x 6 in.
35 in. x 90 in. x 4 in.
35 in. x 90 in. x 5.5 in.
2141-800-1 07 REV A
• 4.8 km/h
• 2.88 km/h
88,9 cm x 213,4 cm x 15,2 cm
88,9 cm x 228,6 cm x 10,1 cm
88,9 cm x 228,6 cm x 13,9 cm
English
EN
1-9