Stryker InTouch Critical Care Bed Manuel D'exploitation page 75

Starting and stopping Turn Assist (Continued)
6. Tap Start to begin Turn Assist and hold time selected.
Note: Tap X to cancel Turn Assist and return to the Turn Assist selection screen or do nothing to allow inflation to
complete. The Inflation in progress window is displayed
Figure 1-63: Turn assist inflation in progress
Note: When inflation is complete, the Turn Assist time remaining window is displayed and the selections are gray
(Figure 1-64 on page 1-69). The timer will count down to zero and then the support surface deflates.
To stop Turn Assist, tap Stop.
www.stryker.com
Operation
Figure 1-62: Therapy cannot be started
(Figure 1-63 on page
2141-800-1 07 REV A
1-69).
Figure 1-64: Turn assist time remaining
English
EN
1-69