Selecting Patient Weight Range - Stryker InTouch Critical Care Bed Manuel D'exploitation

English

Selecting patient weight range

EN
Tap Surface Settings on the Pressure Redistribution screen (A)
1. Tap the up and down arrows to select the desired weight range
Note: A healthcare professional should determine the use of the Isolibrium support surface and therapies outside of
the therapeutic weight range of 50 lb to 350 lb (22.7 kg to 158.7 kg).
2. Confirm patient weight range.
Notes
• The patient weight range default is based on the weight that is measured by InTouch scale when patient is stable.
• Patient weight is presented in pounds or kilograms based on the InTouch selection.
• The patient weight range selection is between 50 lb and 460 lb (22.7 kg and 208.7 kg) and is used as input for
Pressure Redistribution.
1-60
Operation
(Figure 1-47 on page
Figure 1-47: Pressure redistribution screen
Figure 1-48: Surface setting screen
2141-800-1 07 REV A
1-60).
(Figure 1-48 on page 1-60).
www.stryker.com