Stryker InTouch Critical Care Bed Manuel D'exploitation page 96

English
Configuring iBed Awareness (Continued)
EN
To enter the Smart bed position screen, tap Awareness
(see Main menu: iBed (optional) on page
To monitor a parameter, tap the desired function to
monitor (Figure 1-99 on page
Note: Options change from blue (deactivated) to green
(activated) when tapped.
To monitor the product's currently monitored functions,
tap Monitor current bed situation
1-90).
To stop monitoring a parameter, tap the activated
parameter or tap Deselect all.
To set an alarm tone for iBed Awareness, tap the bell
icon to access the alarm settings
on page 1-52).
Note: If InTouch is equipped with the optional iAudio
feature, voice alarms are available. Voice alarms replace
the buzzer alarm and play through the inside siderail
speakers.
To return to the iBed screen, tap Back
page 1-90).
If no parameter conditions are selected for iBed
Awareness, the LED light bars on the outside siderails and
footboard do not activate.
If parameter conditions are selected for iBed Awareness,
the LED light bars on the outside siderails and footboard
illuminate green.
If the parameter conditions selected for iBed Awareness
are compromised, the LED light bars on the outside
siderails and footboard flash amber, a sound alarm is
triggered, the compromised parameter condition is
highlighted amber
Event Manager screen appears
91).
To return to the iBed screen, tap Back
page 1-90).
1-90
1-88).
1-90).
(Figure 1-99 on page
(Setting the alarm tones
(Figure 1-99 on
(Figure 1-100 on page 1-90), and the
(Figure 1-101 on page 1-
(Figure 1-100 on
Operation
Figure 1-99: iBed Awareness
Figure 1-100: iBed Awareness compromised
2141-800-1 07 REV A www.stryker.com