Removing Or Replacing The Footboard - Stryker InTouch Critical Care Bed Manuel D'exploitation

Operation
English

Removing or replacing the footboard

EN
CAUTION
Do not move footboards from one product to another. Individual products may have different options. Mixing footboards
could result in unpredictable operation of the product.
Note: Do not lock the control panel functions from the footboard if you must access the control panel functionality when
you remove the footboard.
You can easily remove the footboard for patient accessibility, cleaning, and attachment of the bed extender (optional).
To remove the footboard, grasp the handles and lift the footboard straight up and off the product (Figure 1-15 on page 1-
30).
To replace the footboard, lower the footboard onto the footboard connector. Make sure that the footboard properly fits
onto the footboard connector on the foot end of the litter (Figure 1-16 on page 1-30).
Figure 1-15: Removing the footboard
Figure 1-16: Replacing the footboard
1-30 2141-800-1 07 REV A www.stryker.com