Main Menu: Chaperone Bed Exit - Stryker InTouch Critical Care Bed Manuel D'exploitation

English

Main menu: Chaperone Bed exit

EN
Name
A Zone 1
B Zone 2
C Zone 3
D Arm
E Disarm
F Alarm
WARNING
• Bed exit is intended only to aid in the detection of a patient exiting the product. It is not intended to replace patient
monitoring protocol.
• Bed exit is not designed to be used with patients weighing less than 50 lb (23 kg).
• Power save mode activates after one hour on battery power with no motion release switch activation. Bed exit, scale,
and product motion stops operating when the product enters the power save mode.
1-50
Operation
A B
D
Function
The patient can move freely, but the alarm sounds when the patient
attempts to leave the product.
The patient can move with limited movement. The alarm sounds when
the patient approaches the siderails or moves toward the foot end.
The patient can move with minimal movement. The alarm sounds when
the patient moves out of the center of gravity.
Arms bed exit
Disarms bed exit
Accesses the alarm settings menu
2141-800-1 07 REV A
C
E F
www.stryker.com