Installing The Optional Head End Storage Flat - Stryker Power Pro Cot 6500 RUGGED Manuel D'utilisation

Installing the Optional Head End Storage Flat

Crossbar
1. Install the Velcro ® straps (A) across the V-Tube near the pneumatic cylinder and around the crossbar of the retractable
head section.
2. Buckle the restraint straps (B) around the outer rails of the retractable head section.
WARNING
When the optional head-end storage flat is being used, ensure it does not interfere with the operation of the retractable
head section, safety bar and safety hook. Injury to the patient or operator could result.
CAUTION
Do not store items under the ambulance cot mattress. Storing items under the mattress can interfere with the operation
of the ambulance cot.
The weight of the equipment in the head end storage flat (if equipped) must not exceed 40 pounds (18 kg).
www.stryker.com
Cot Features
Figure 32 - Head End Storage Flat
6500-009-005 REV A
V-Tube
5