Configuring Ibed Awareness - Stryker InTouch Critical Care Bed Manuel D'exploitation

Configuring iBed Awareness

When enabled, iBed Awareness helps to monitor InTouch's status and parameter conditions.
WARNING
®
• Do not use iBed Awareness as a lock indicator for siderails. iBed
of the siderails. It is not intended to replace patient monitoring protocol.
• The iBed ® Awareness LED light bars are only intended to monitor the product status and parameter conditions. It is
not intended to replace patient monitoring protocol.
• You must physically verify that the siderails are locked before arming iBed
CAUTION
• Make sure that you set the desired product parameters before enabling iBed® Awareness.
• Do not use accessories that cover the footboard and outside siderail LED light bars.
®
• Do not turn off the iBed
compromised parameter condition.
www.stryker.com
Operation
Awareness alarm. You will lose access to the event manager that displays the
2141-800-1 07 REV A
®
Awareness is only intended to detect the position
® Awareness.
English
EN
1-89