Preparing For Lateral Rotation - Stryker InTouch Critical Care Bed Manuel D'exploitation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English

Preparing for Lateral Rotation

EN
Lateral Rotation allows the operator to rotate the patient from left to right by increasing or decreasing the rotation levels
and hold times.
WARNING
Always make sure that the tubing and wiring that is connected to the patient is long enough, stable, and secure
during Lateral Rotation or Turn Assist.
Do not extubate or intubate patients during Lateral Rotation or Turn Assist. The functions could interfere with the
performance of the ancillary devices.
Always raise all of the InTouch bed siderails before beginning Turn Assist or Lateral Rotation.
Do not zero the bed scales or weigh the patient with Lateral Rotation or Turn Assist active. Motion from the support
surface functions may adversely affect the scale system performance.
Do not arm bed exit with Lateral Rotation or Turn Assist active. The patient motion and position that results from the
support surface may adversely affect bed exit system performance.
Always deflate the Isolibrium support surface before beginning CPR.
Always center the patient on the support surface. Align the patient's head toward the headboard before starting
functions. Check the patient frequently to make sure that you maintain the proper positioning.
To prepare for lateral rotation:
1.
Position the patient in the center of the support surface.
2.
Raise all of the bed siderails.
3.
Lower the bed height to the lowest practical position.
4.
Set the head of bed angle between -5° to 60°.
Notes
A healthcare professional should determine the use of the Isolibrium support surface and therapies outside of
the therapeutic weight range of 50 lb to 350 lb (22.7 kg to 158.7 kg).
Lateral Rotation will not function if the siderails are down. However, Pressure Redistribution, Max Inflate and
Turn Assist will still activate without the siderails up. If a siderail is lowered or unlocked during Lateral Rotation,
the function will automatically stop.
1-62
Operation
2141-800-1 07 REV A
www.stryker.com

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Fl2721312141

Table des Matières