Support Surface Malfunctioning - Stryker InTouch Critical Care Bed Manuel D'exploitation

Support surface malfunctioning

If the support surface Call Maintenance Quick Link is active in the InTouch navigation bar
tap the button to display the Support Surface error condition message.
Figure 1-79: Call Maintenance Quick Link Active for Isolibrium
If the support surface malfunction message is displayed
access to the support surface functions depending upon the malfunction.
If the support surface malfunction message is displayed
1. Immediately remove the patient from the support surface.
2. Immediately remove the product from service.
3. Contact the appropriate maintenance personnel.
www.stryker.com
Operation
Figure 1-80: Support surface malfunction
(Figure 1-80 on page
Figure 1-81: Remove from service
(Figure 1-81 on page
2141-800-1 07 REV A
(Figure 1-79 on page
1-75), the operator may have limited
1-75):
English
EN
1-75),
1-75