Motion control panel (outside siderail) (Continued)
Notes
•
Do not lock the motion control panel functions from the footboard if you must access the motion control panel
functionality when you remove the footboard.
•
The addition of accessories affects the motion of the bed.
•
Foot end section mobility stops when you insert an accessory into the traction socket at the foot end of the product.
•
The maximum angle of inclination during the Trendelenburg and reverse Trendelenburg position is 15°.
•
You must have a minimum clearance of 20 in. for the Trendelenbu rg and Reverse Trendelenburg positions.
•
You can lower the height while in Trendelenburg without changing the angle.
www.stryker.com
Operation
2141-800-1 07 REV A
English
EN
1-33