Recording Patient Weight With A Delay - Stryker InTouch Critical Care Bed Manuel D'exploitation

Recording patient weight with a delay

Notes
• The delayed time is set to 15 seconds.
• The patient must be still while the scale records their
weight. If the scale cannot measure a stable weight
value, no weight entry is recorded.
To record patient weight with a delay:
1. Tap Delayed Weight (see
1-44).
Note: The 15 second timer starts.
2. Remove or lift up any equipment you do not want
calculated into the patient's weight. This includes
anything lying on the product or resting on the patient.
Note: To cancel the request, tap Cancel
on page 1-45).
• The scale beeps after 10 seconds elapses.
• The scale calculates the weight of the patient for
the next five seconds.
• The scale beeps again, and then the Delayed
Weight screen appears
45).
3. Return the equipment to its original position.
To change the displayed measuring unit, tap lbs/kg
(Figure 1-23 on page 1-45).
To return to the Scale screen, tap Close
page 1-45).
www.stryker.com
Operation
Main menu: Scale on page
(Figure 1-22
(Figure 1-23 on page 1-
(Figure 1-23 on
2141-800-1 07 REV A
Message
S t a r t w e ig h t
w it h d e la y
Figure 1-22: Start weight with delay
Figure 1-23: Delayed Weight
English
EN
Ca n c e l
1-45