Cancelling Functions; Locking Support Surface Functions; Unlocking Support Surface Functions - Stryker InTouch Critical Care Bed Manuel D'exploitation

Operation
English

Cancelling functions

EN
The actions listed below will cancel a current function (Lateral Rotation, Turn Assist, or Max Inflate) and display the
cancellation confirmation notice (Figure 1-72 on page 1-73 ).
1. You select a new function
2. You select Pressure Redistribution and change the firmness setting
3. You select Pressure Redistribution and change the patient weight range
Figure 1-72: Cancellation confirmation
Note: If you choose not to cancel the current function, tap X.

Locking support surface functions

To lock all support surface functions:
Tap Lock which is located at the top of the Support Surface display (Figure 1-73 on page 1-73).
Figure 1-73: Locked
Note: Active lock is orange.

Unlocking support surface functions

To unlock all of the support surface functions, tap Lock which is located at the top of the Support Surface display
(Figure 1-74 on page 1-73).
Figure 1-74: Unlocked
Note: Inactive lock is white.
www.stryker.com 2141-800-1 07 REV A 1-73