Changing The Control Panel Led Backlight Intensity - Stryker InTouch Critical Care Bed Manuel D'exploitation

Changing the control panel LED backlight intensity

The nurse control backlight changes the LED backlight intensity for all control panels (motion control panel, brake control
panel, footboard control panel, and head end control panel (optional)).
Five settings are available for the control panel LED
intensity (from left to right):
• Setting one: Off — no LED backlight appears when
you push a control panel button
• Setting two: nurse call indicator only — only the
nurse call LED backlight illuminates (inside siderails)
• Setting three: low LED intensity for control panels
• Setting four: medium LED intensity for control panels
• Setting five: high LED intensity for control panels
To change the intensity of the LED backlight:
1. Tap Nurse Control Backlight
on page 1-76).
2. Tap the left or right arrow
3. To save the LED intensity setting, tap Close
90 on page 1-81).
www.stryker.com
Operation
(Main menu: Options
(Figure 1-90 on page 1-81).
(Figure 1-
2141-800-1 07 REV A
Figure 1-90: Nurse control LED intensity
English
EN
1-81