Operating The Optional Monitor Tray - Stryker InTouch Critical Care Bed Manuel D'exploitation

English

Operating the optional monitor tray

EN
WARNING
• Do not place objects that exceed 40 lb (18 kg) onto the optional monitor tray.
• Do not exceed the 150 lb (68 kg) load capacity for the tray support pole.
To operate the optional monitor tray:
1. Pull down the tray support pole lock (G)
2. Swing the tray support pole out 90° (H)
3. Grasp the bottom of the monitor tray and flip it up onto the tray support pole (I)
4. Press the monitor tray into the tray support pole to secure the monitor tray.
5. Using the strap, strap the monitor to the monitor tray.
Figure 1-129: Tray support lock
1-110
Accessories
(Figure 1-129 on page 1-110).
(Figure 1-130 on page 1-110).
Figure 1-130: Swinging out the tray support pole
Figure 1-131: Flipping up the monitor tray
2141-800-1 07 REV A
(Figure 1-131 on page 1-110).
www.stryker.com