Changing Head Of Bed Angle During Lateral Rotation; Timing Duration Lateral Rotation - Stryker InTouch Critical Care Bed Manuel D'exploitation

Changing head of bed angle during Lateral Rotation

If during full Lateral Rotation the HOB angle is increased to > 35°, the level of rotation is automatically reduced. A
notification of change is displayed
To continue with lateral rotation at reduced rotation, tap OK.
To change back to full rotation:
1. Tap OK
2. Stop therapy
3. Lower the HOB to < 36°
4. Increase the rotation level back to full
5. Restart Lateral Rotation

Timing duration Lateral Rotation

Lateral Rotation stops automatically when the duration of 100 hours is reached
operator is notified that Lateral Rotation has been cancelled (
To return to the Lateral Rotation screen, tap OK.
Figure 1-59: Lateral rotation total time elapsed
www.stryker.com
Operation
(Figure 1-58 on page 1-67). You have the following options:
Figure 1-58: Notification for rotation level was reduced
Figure 1-60 on page
2141-800-1 07 REV A
due to raised HOB
(Figure 1-59 on page
1-67).
Figure 1-60: Lateral rotation duration time reached
English
EN
1-67). The
1-67