Viewing The Ibed Locator Connection Status (Optional) - Stryker InTouch Critical Care Bed Manuel D'exploitation

Viewing the iBed Locator connection status (optional)

Note: The iBed Locator must be installed and configured in order to view this option.
To view the iBed Locator connection status, tap iBed
Locator (see Main menu: Options on page
the iBed Locator connectivity icon at the bottom of the
touch screen.
Locator ID: Displays the iBed Locator ID.
Battery Status: Indicates the charge left in the iBed
Locator battery.
Note: Replace the iBed Locator batteries as necessary.
If the iBed Locator is not connected, a red X appears next
to the iBed Locator connectivity icon, no Locator ID is
displayed, and the Battery Status field displays Not
Connected (Figure 1-97 on page
To return to the Options screen, tap Back
on page 1-85).
If the iBed Locator is connected, a green check mark
appears next to the iBed Locator connectivity icon, a valid
Locator ID is displayed, and the Battery Status field
displays Good or Low, depending on the battery charge
(Figure 1-98 on page 1-85).
To return to the Options screen, tap Back
on page 1-85).
www.stryker.com
Operation
1-76) or tap
1-85).
(Figure 1-97
Figure 1-97: iBed Locator Information (not connected)
(Figure 1-98
2141-800-1 07 REV A
Figure 1-98: iBed Locator Information (connected)
English
EN
1-85