Measuring Weight Gain Or Loss - Stryker InTouch Critical Care Bed Manuel D'exploitation

Measuring weight gain or loss

The gain or loss function compares the initial patient weight to the current patient weight. It then displays the weight the
patient has gained or lost since the initial patient weight reading.
To view gain or loss, tap Gain or Loss (see
Scale on page 1-44).
To change the displayed measuring unit, tap lbs/kg
(Figure 1-32 on page 1-49).
To reset the gain or loss measurement, tap Reset
1-32 on page 1-49).
To return to the Scale screen, tap Close
page 1-49).
To reset the gain or loss measurement, tap Ok
33 on page 1-49).
To cancel the request, tap Cancel
1-49).
Note: The request is cancelled if the bed goes into auto
shutoff.
A confirmation notification indicates that the resetting of
the gain or loss is complete (Figure 1-34 on page
www.stryker.com
Operation
Main menu:
(Figure
(Figure 1-32 on
(Figure 1-
(Figure 1-33 on page
1-49).
2141-800-1 07 REV A
Figure 1-32: Gain or loss
Message
Reset
Gain or Loss?
Figure 1-33: Reset gain or loss?
Message
Gain
r e s e t s u c c e s s !
Figure 1-34: Gain or loss reset success!
English
EN
O k Ca n c e l
Or Loss
1-49