Télécharger Imprimer la page

Nurse Call Usage; Auxiliary Power Outlet Usage; Head And Footboard Operation - Stryker InTouch FL27 Manuel D'utilisation

Masquer les pouces Voir aussi pour InTouch FL27:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 83

NURSE CALL USAGE

The Nurse Call function allows the patient to communicate through a speakerphone with the nurse station by simply
pressing the Nurse Call button on the Patient Control . The speakerphones are located on the inner side of the head
end siderails .
The communication between the patient and the nurse station is established the moment a member of the nursing staff
responds to the call signal .
Note
The Nurse Call system will automatically send a call signal to the nurse station if the communication between the bed
and the nurse station is interrupted following a power failure, the switching off of the bed or the disconnection of the
Nurse Call communication cable .

AUXILIARY POWER OUTLET USAGE

The auxiliary power outlet provides the nursing staff with a convenient power source for accessories authorized by
Stryker only; 120V plug Type B only . The outlet is located on the left side at the foot end of the bed . A 5A breaker is
integrated to the power outlet .
WARNING
Use only hospital grade electric equipment consuming 3A or less with the auxiliary power outlet . The use of standard
electric equipment may bring the current leakage to a level unacceptable for hospital equipment .

HEAD AND FOOTBOARD OPERATION

Both the footboard and the headboard can be removed or replaced easily . The removal of the headboard allows easy
access to the patient's head .
To Remove Boards
1 .
Grasp both ends of the board and lift up .
To Install Boards
1 .
For the headboard: Insert the board posts inside the mounting sockets and push down to secure it .
2 .
For the footboard: Insert the board slowly in the mounting sockets while ensuring that the board connector properly
fits on the connector of the foot end casing .
Note
If the footboard must be removed and the bed electric functions remain accessible through the siderails, ensure that
the siderail controls are operational by deactivating any lockout activated before removing the footboard .
www.stryker.com
Litter Operation Guide
2151-009-005 REV B
Return To Table of Contents
1-21

Publicité

loading

Ce manuel est également adapté pour:

Intouch 2151Intouch 2152