Applying the linens
E E N N
WARNING
•
Always make sure that the operator has access to the CPR straps.
•
Do not stick needles into a support surface through the support surface cover. Holes may allow body fluids to enter
the inside (inner core) of the support surface and could cause cross-contamination, product damage, or product
malfunction.
•
Do not use fitted sheets with this support surface.
To apply the linens:
1. Apply the linens using the "D" rings for the flat sheet.
2. Thread the four linen corners through the "D" rings (C) attached to the support that are surface to secure the linens
(A) to the support surface (B).
Note: Do not pull the linens tight. Keep the linens loose and as smooth as possible on top of the support surface to
effectively use the Turn Assist and Lateral Rotation functions.
1-14
Operation
B
A
Figure 1-2: Apply linens
2971-109-001 REV B
C
www.stryker.com