Assembly; Assembling The Cl03/Cl03-Xl With Bus Coupler - Aventics CANopen VS CL03 Série Mode D'emploi

74 AVENTICS | CANopen | R402003660–BAL–001–AE

Assembly

6 Assembly
6.1 Assembling the CL03/CL03-XL with bus
coupler
Risk of damage to the manifold
The bus coupler may be damaged if the cover is exposed to
mechanical force, such as a hard blow.
Make sure that the device is protected from blows.
Make sure that the device is well packaged during
transport.
You will receive your individually configured CL03/CL03-XL
series valve system completely fitted with all components:
Bus coupler
Valve terminal
End plate
The operating instructions accompanying the CL03/CL03-XL VS
describe in full how to assemble the entire valve system. The VS
may be mounted in any orientation. However, mounting the VS
with the connections upwards should be avoided if possible.
Also avoid mounting the VS with the pilot valves at the lower
end.
The dimensions of the complete VS vary according to the
configuration. See Fig. 3, where 'N' = number of subbases.3