B Déclarations Et Certificats; B.1 Eu Declaration Of Incorporation In Accordance With Iso/Iec 17050-1 :2010 - Universal Robots UR16e Manuel De L'utilisateur

B Déclarations et certificats
This chapter presents certificates and declarations prepared for the e-Series robots with the standard
control box.
B.1 EU Declaration of Incorporation in accordance with ISO/IEC 17050-
1 :2010
Manufacturer :
Universal Robots A/S
Energivej 25
DK-5260 Odense S Denmark
Description and Identification of the Partially-Completed Machine(s) :
Product and Function :
Model :
Serial Number :
Incorporation :
It is declared that the above products, for what is supplied, fulfil the following Directives as Detailed
Below :
I Machinery Directive 2006/42/EC — The following essential requirements have been fulfilled : 1.1.2,
1.1.3, 1.1.5, 1.2.1, 1.2.4.3, 1.2.6, 1.3.4, 1.3.8.1, 1.5.1, 1.5.2, 1.5.6, 1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3 It is
declared that the relevant technical documentation has been compiled in accordance with Part B of
Annex VII of the Machinery Directive.
II Low-voltage Directive 2014/35/EU — Reference the LVD and the harmonized standards used below.
III EMC Directive 2014/30/EU — Reference the EMC Directive and the harmonized standards used be-
low.
IV RoHS Directive 2011/65/EU — Reference the RoHS Directive 2011/65/EU
Version 5.5
Person in the Community Authorized to Compile the
Technical File :
David Brandt
Technology Officer, R&D
Universal Robots A/S
Energivej 25, DK-5260 Odense S
Industrial robot (multi-axis manipulator with Control Box
and Teach Pendant). Function is determined by the com-
pleted
machine (with end-effector and intended use).
UR3e, UR5e, UR10e,UR16e (e-Series)
Starting 20195000000 and higher — Effective 17 August
2019
Universal Robots UR3e, UR5e, UR10e and UR16e shall
only be put into service upon being integrated into a final
complete machine
(robot system, cell or application), which conforms with
the provisions of the Machinery Directive and other ap-
plicable Directives.
I-61 UR16e