Intended Use Of Sterilization Trays; Warnings; Cautions - Stryker 0234010520 Guide

While these instructions have been validated by the manufacturer as being capable
of preparing the tray for re-use, it remains the responsibility of the processor to
ensure that the reprocessing (as actually performed, using equipment, materials,
and personnel in the reprocessing facility) achieves the desired result. This normally
requires validation and routine monitoring of the process.

Intended Use of Sterilization Trays

Sterilization trays are plastic and/or metal containers used to hold and protect surgical
devices during the sterilization process. They consist of an interlocking tray and lid,
which are both perforated to allow the passage of sterilizing agent from outside the
tray to the devices placed inside.
Sterilization trays typically feature a silicon nger mat or group of device holders that
secure devices during the sterilization process. Some models feature stacking internal
trays to allow the segregation of devices.

Warnings

These instructions are validated only for sterilization of the tray and device(s)
identi ed herein. Using combinations or parameters not described in this
manual may result in incomplete sterilization.
These instructions do not replace the cleaning instructions provided with These instructions do not replace the cleaning instructions provided with
individual devices. Prior to sterilization, clean all devices as speci ed in their devices. Prior to sterilization, clean all devices as speci ed in their
respective user manuals.
Wear appropriate protective equipment (gloves, eye protection, etc.) when Wear appropriate protective equipment (gloves, eye protection, etc.) when Wear appropriate protective equipment (gloves, eye protection, etc.) when Wear appropriate protective equipment (gloves, eye protection, etc.) when
reprocessing any medical device.
Both the device and the tray must be cleaned prior to sterilization, or Both the device and the tray must be cleaned prior to sterilization, or Both the device and the tray must be cleaned prior to sterilization, or Both the device and the tray must be cleaned prior to sterilization, or
incomplete sterilization will result.
The sterilization tray, its lid, and any internal components have been designed The sterilization tray, its lid, and any internal components have been designed The sterilization tray, its lid, and any internal components have been designed The sterilization tray, its lid, and any internal components have been designed
and validated for use as a single system. Do not separate components from validated for use as a single system. Do not separate components from validated for use as a single system. Do not separate components from
the system, for use individually or in combination, or incomplete sterilization system, for use individually or in combination, or incomplete sterilization
may result.
Inspect the tray and its components for visible damage, such as cracking or
chipping, prior to use. Do not use the tray if it is damaged.

Cautions

Before lifting the tray assembly, verify that the latches connecting the lid to the
tray are secure.
The tray is not designed for use as a shipping container. To avoid damage,
remove all devices and pack them separately.
3