Main Menu: Bed Exit - Stryker InTouch FL27 Manuel D'utilisation

MAIN MENU: BED EXIT

Bed Exit
Room #:
Figure 9.0
Button Name
A Traditional Bed Exit Zone
B Medium Zone
C Small Zone
Arm
D
Disarm
E
Volume
F
Note
• A minimum of 5 lbs is necessary to arm the Bed Exit System .
• During a power outage, the parameters that were set for the detection of the Bed Exit are maintained and saved .
When power resumes, the system will reactivate itself to the same state it was before the power outage . The zone
that was selected before the power outage and the signal CALL NURSE on the wall of the hospital (optional) are
activated .
• The blue color on one of the zones indicates that this is the zone which is actually activated .
• When the zone color turns red, it means that there is a Bed Exit Alarm . In that case the Event Manager window
will appear .
www.stryker.com
Footboard Operation Guide
A
Arm
D
Function
Press this button to activate the complete zone of detection .
This is the default zone .
Press this button to activate the medium zone of detection .
Press this button to activate the small zone of detection .
Press this button to Arm the Bed Exit Detection System .
Press this button to Disarm the Bed Exit Detection System .
Press this button to access the Volume menu for the alarm .
2151-009-005 REV B
B C
Disarm
Oct. 25,2007
E
Return To Table of Contents
12:00 AM
F
1-37