Foot Board Control Panel Guide - Stryker GoBed II Lit MedSurg FL28EX Guide D'utilisation

FOOT BOARD CONTROL PANEL GUIDE

BED EXIT CONTROLS
(optional)
page 1-22
SCALE
CONTROLS
page 1-19
A: Press to raise/lower the Fowler .
B: Press to raise/lower the Gatch .
Note
The bed is equipped with the Auto Contour positioning . This function partially raises the Gatch as the Fowler is raised .
It prevents the patient from slipping toward the foot end of the bed . The function is operational by default . To deactivate
it: press the Gatch lockout control (D3), and the padlock icon will light up . Note that the Gatch functions on the siderail
control panels will not operate longer while the lockout is activated .
C: Press to raise/lower the bed .
D1: Press to lockout all the controls related to the mattress support sections and bed height . The padlock icon will
light up . The total lockout control deactivates the foot end and siderail controls .
Note
The total lockout will not affect the operation of the nurse call (optional), Scale (optional) or Bed Exit (optional) systems .
D2, D3: Press to lockout the inner and outer siderail control panel Fowler (D2) and Gatch (D3) functions . The
corresponding padlock icon will light up .
Note
The foot end controls are not affected by lockouts D2 and D3 . In the event of a power failure, the lockout settings will
be saved .
E: Press to obtain the cardiac chair position . Hold the button down until the bed reaches the cardiac chair position .
The fowler and gatch sections will reach their highest positions and the bed will move into reverse Trendelenburg .
F1: Press to obtain the desired Trendelenburg (head down, foot up) position . To return the sleep surface to the
horizontal position, simply use the bed Hi-Lo controls to either raise or lower the sleep surface to its limits .
F2: Press to obtain the desired reverse Trendelenburg (head up, foot down) position . To return the sleep surface
to the horizontal position, simply use the bed Hi-Lo controls to either raise or lower the sleep surface to its limits .
Return To Table of Contents
1-18
Operation Guide
C
D1
D2
Figure 2.14A
28EX-009-001 REV B
D3
E
F1
F2
A B
www.stryker.com