Operation Guide; Applying The Brake System - Stryker 1037 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39

APPLYING THE BRAKE SYSTEM

For user convenience, a brake/steer control pedal is located on both ends of the stretcher as shown in Figure 1.
WARNING
Always apply the brakes when a patient is getting on or off the stretcher. Push on the stretcher to ensure that the brakes
are securely locked. Always engage the brakes unless the stretcher is being moved. Injury could result if the stretcher
moves while a patient is getting on or off the stretcher.
To engage the brakes on the foot end, push down on the brake (red) side of pedal (A).
To engage the brakes on the head end, push down on the brake (red) side of pedal (B).
To release the brakes on the foot end, push down on the steer (green) side of pedal (A).
To release the brakes on the head end, push down on the steer (green) side of pedal (B).
Note: Your stretcher may be equipped with optional side control brake and steer functions (C) in addition to the
standard head end (A) and foot end (B) controls. The side control brakes operate the same as the head end and foot
end brakes.
A
Note: The bottom of the brake pads should be cleaned regularly to prevent wax or floor remnant buildup.
A
B
www.stryker.com

Operation Guide

C
C
Figure 1: Brake System
Brake and Steer functions (foot end)
Brake and Steer functions (head end)
1037-009-005 REV B
B
Head End
Return To Table of Contents
1-11
English

Publicité

Table des Matières
loading

Table des Matières