Assembly Of The Handle Bars - DS Produkte Leg Magic Mode D'emploi

3. Setting Up the Trainer
a. Grab onto the ends of the left and right
track and position the device right side up.
b. While holding the right and left tracks
together, loosen the fi xing knob by turning
it counter-clockwise.
c. Lower the left and right track slowly down
to the fl oor.
d. Tighten the fi xing knob by turning it clockwise.
Handle bars
Adjustment
knob
03355_DE-GB-FR-NL_V6.indb 43
3a
Grab onto
both tracks and
set the device
right side up.

4. Assembly of the Handle Bars

Groove Groove
Remove the adjustment knob on the support
rob by turning it counter-clockwise.
Bore
Pull the adjustment knob out and insert
the handle bars. Ensure that the holes in
the handlebars are on the same side as the
adjustment knob. (The groove in the handle
Support
bars is aligned with the bore in the support
pole
pole.) Allow the adjustment knob to lock into
one of the holes in the handle bars. Tighten
the adjustment knob.
Ensure that the adjustment knob has been
tightened securely before you start your
exercises.
43
3c
Press both tracks
towards the fl oor.
3b
Hold on to
both tracks and
loosen the fi xing
knob.
3d
Fixing knob
06.07.11 09:12