Breville the Custom Loaf BBM800XL Mode D'emploi page 57

TROUBLESHOOTING
BAKING BREAd
PROBLEM
Why does the paddle come
out with the bread?
Why is there smoke coming
out of the bread maker?
dELAy START
PROBLEM
Why can't the delay Start
feature be set past 13 hours?
Why can't some ingredients
be used with the delay
Start feature?
BBM800XL_IB_B10_FA.indd 57
EASy SOLUTION
• This can happen as the paddle is detachable. Use a non-metal utensil to remove it from
the baked loaf before slicing. Use caution as the paddle will be hot. Alternatively, you can
remove the paddle before the start of the 'bake' phase. Refer to page 25.
• It is normal that the bread maker emit a fine smoke during first use as it burns off the
protective substances on the heating element. It is also normal that steam emit from the
steam vents.
• However, smoke can also be caused by spilt ingredients on the outside of the bread pan and
inside the baking chamber. Without turning off the bread maker, remove the plug from the
power outlet. With a soft damp cloth (non-metallic, non-abrasive), clean then thoroughly dry
the outside of the bread pan, baking chamber and heating element, using caution as they
will be hot. Reinsert the power plug. The Power Failure Protection will automatically resume
the cycle where it was interrupted.
EASy SOLUTION
• The ingredients may deteriorate in quality or ferment if they are left inside the bread pan for
many hours. This is especially the case during summer, when the Delay Start feature should
be set to a shorter period of time.
• Most protein foods such as milk, cheese, eggs, bacon, etc., are perishable and will deteriorate
if left unrefrigerated for more than one hour.
57
14/09/10 9:09 AM