Breville the Custom Loaf BBM800XL Mode D'emploi page 14

OPERATING yOUR BREvILLE BREAd MAKER - BEGINNER'S GUIdE
d) If using the collapsible paddle, ensure it is inserted in the
upright position for thorough mixing during the 'knead 1'
phase. The collapsible paddle will automatically collapse
into the flat position then return to the upright position
during the appropriate times in the 'knead 2', 'rise' and
'punch-down' phases, then collapse before the 'bake' phase
begins to minimize the hole at the bottom of the baked loaf.
flat Position
3. Add ingredients to the Bread Pan
a) If using the collapsible paddle, ensure it is securely inserted
and in the upright position.
b) Before adding ingredients to the bread pan, ensure they are:
− Fresh. In particular, fresh flour and yeast are critical –
check the 'Best Before Date' stamped on the package.
For tips on checking the freshness of your yeast, refer to
'Yeast', page 46.
14
BBM800XL_IB_B10_FA.indd 14
− Measured and weighed accurately. Refer to 'Tips
for Better Bread Making - Measuring and Weighing
Ingredients', page 39. In particular, it is very important
to spoon or scoop the dry ingredients loosely into the
measuring cup then level the top of the cup by sweeping
the excess with the back of a knife or spoon handle.
NEvER scoop the cup into the flour bag, tap the cup or
pack ingredients into the cup as this extra amount can
affect the critical balance of the recipe.
− At room temperature 68°F-77°F (20°C-25°C), except
all liquids which should be 80°F (27°C) unless stated
otherwise. Temperatures too cool or too warm can
prevent the yeast from activating and affect the way
the bread rises and bakes.
c) Add ingredients to the bread pan in the order listed in the
recipe to ensure the dough mixes thoroughly and rises
sufficiently. Wipe any spilt ingredients from the rim and
outside of the pan and ensure it is clean and dry.
− Liquid ingredients
− Fats
Upright Position
− Dry ingredients eg. salt, sugar, flour
− Yeast
Yeast/Baking Powder or Baking Soda
Dry Ingredients
Fats
Water or Liquids
14/09/10 9:09 AM