Breville the Custom Loaf BBM800XL Mode D'emploi page 50

CARE & CLEANING
Cleaning the Bread Pan
1. Half fill the bread pan with warm soapy water. A non-
abrasive liquid cleanser or mild spray solution may be used.
Allow to stand for 10-20 minutes.
NOTE
Do not immerse the outside of the bread pan in water as
this may interfere with the free movement of the wing-
nut and drive shaft. Submerge and wash only the interior
of the bread pan.
2. Remove the paddle and wash the inside of the bread pan with
a soft cloth. Do not use an abrasive cleanser or metal scouring
pad as these will scratch the non-stick coating. Ensure there is no
baked-on residue or dough on the drive shaft. Rinse thoroughly.
3. Let all surfaces dry thoroughly prior to inserting into the
stainless steel housing.
NOTE
− Some discoloration may appear on and inside the bread
pan over time. This is a natural effect caused by moisture
and steam and will not affect the bread in any way.
− The inside of the bread pan is coated with a high
quality non-stick coating. As with any non-stick
coated surface, do not use abrasive cleansers, metal
scouring pads or metal utensils to clean these items as
they may damage the finish.
− Never wash the bread pan in the dishwasher.
50
BBM800XL_IB_B10_FA.indd 50
Cleaning the Paddle
1. Wash the collapsible paddle and fixed paddle with warm
soapy water and a soft cloth.
2. Ensure there is no baked-on residue in any of the paddle
crevices, including the 'D' shaped hole and hinge area.
If there is, soak the paddle in warm soapy water. A non-
abrasive liquid cleanser or mild spray solution may be used.
Allow to stand for 10-20 minutes. Use a wooden toothpick,
thin wooden skewer or plastic cleaning brush to remove any
bread residue from the crevices and hinge area. Failure to
clean the hinge area may eventually result in the collapsible
paddle not working effectively. Rinse thoroughly.
3. Let all surfaces dry thoroughly prior to inserting into the
bread pan.
NOTE
We do not recommend washing the paddles in the
dishwasher. To extend the life of the non-stick coating,
always wash in warm soapy water. Do not use abrasive
cleansers, metal scouring pads or metal utensils to
clean the paddles as these items may damage the
paddle surface.
14/09/10 9:09 AM