COOK Medical MINC+ Mode D'emploi page 17

K-MINC-2000 Instructions for Use
3. Select Computer account and click on the Next button.
4. With the default selection of Local computer, click on the Finish
button.
5. Click on the OK button to complete to snap-in addition.
6. Expand Certificates - Local Computer -> Personal -> Certificates
as shown below:
7. Right-click on the client certificate (PC name in Issued To and Issued
By fields) and select All Tasks -> Export... This is a self-signed
certificate created by the installation of DishTrace PC.
8. Press Next in Certificate Export Wizard to go to Export Private Key.
9. Select No, do not export the private key and click on Next.
10. Select DER encoded binary X.509(.CER) format and press the Next
button.
11. Browse to the USB drive and provide the desired file name for the
certificate (e.g., PC name) and click on Save.
12. Select Next to save the certificate file to the USB drive and press the
Finish button to export the client certificate. The Certificate Export
Wizard should indicate the export was successful. Click OK.
13. Exit the snap-in utility. Do not save the console settings.
14. Remove the USB drive containing the PC's certificate.
4.13.6 Import DishTrace PC certificate into MINC+
The PC certificate must be imported to each MINC+ to allow a secure
communications link to be established.
Using the USB drive containing the PC's certificate created as per Section
4.13.5, perform the following steps:
1. Insert the USB drive into the front panel of the MINC+ device.
2. Navigate to the Settings -> Network screen.
3. Ensure the IP address shown is valid as outlined in Section 4.12.3.
4. Press on the pencil icon on the right-hand side of the Certificate text
box.
5. Press the Import New Certificate button and confirm the action by
pressing the Import button.
If you press the magnifying glass symbol on the right-hand side of the
certificate text box, a list of PC certificates already residing on the MINC+
device can be seen in a scroll box.
4.13.7 Establishing a secure network
Once the DishTrace PC certificate has been imported into all of the MINC+
devices, a secure network can be established.
The following steps must be completed when DishTrace PC is run by an
administrator. Start DishTrace PC by right-clicking the DishTrace PC start
icon or selecting DishTrace PC from the Cook Medical program menu, and
then selecting Run as administrator.
At startup of the DishTrace PC program, a summary of the status of the
connected MINC+ devices will be shown at the top on the screen as one
of the following:
• Unlocked Padlock N – Where N is the number of detected MINC+
devices that do not have a secure connection.
• Online: N – Where N is the number of MINC+ devices which have a
secure connection.
• Offline: N - Where N is the number of MINC+ devices which have a
secure connection but are not currently operating.
To create a secure connection to the MINC+ devices, click the Unlocked
Padlock symbol. This will display a screen as shown below:
The unsecured MINC+ devices are shown in the List box at the bottom
of the screen. To create a secure connection to incubator COOK001, for
example, perform the following steps:
1. Click on the (+) symbol in the Connection column. DishTrace will
initiate a secure connection with the MINC+ device and show a
dialog requesting that the user accept a certificate sent by the MINC+
device.
2. Accept the certificate. After you accept the certificate, the Windows
operating system certificate utility will start and ask whether
it should trust the certificate and store it in the PC's certificate
repository.
3. Choose to trust the certificate. The certificate will be stored, and a
secure communication link will be created.
4. Repeat the above steps for all MINC+ devices in the list. As a secure
connection is created for each MINC+ device, the device will be
moved to the incubator list.
4.13.8 Run DishTrace PC
To run the DishTrace PC software, do one of the following:
• Click on the DishTrace PC shortcut on the desktop.
• Click on the Windows operating system start button, scroll down to the
Cook Medical folder, and click on the DishTrace PC entry.
The Incubators screen will appear, and after 30 seconds, it will detect
any MINC+ devices connected to the network. The Incubators screen is
shown by default.
4.14 Chamber operation
4.14.1 Enable incubation chamber keypad
Before any of the MINC+ incubation chamber settings can be altered, the
incubation chamber keypad must be enabled.
To enable the incubation chamber keypad, perform the following steps:
1. Touch the Unlock button. A beep will sound to indicate that the
MINC+ has recognized the button touch.
2. Continue to touch the Unlock button for two seconds and the
keypad backlight will then illuminate.
3. Both left and right keypads are now active.
1-14
English
1