VHF R5 Mode D'emploi D'origine page 50

EN 50
8 Maintenance and do-
it-yourself
Some day-to-day basic maintenance and preventive
maintenance is essential to keep the machine mech-
anics and electric components in good condition for
proper machining results.
It is your responsibility to make sure that preventive
maintenance, as well as basic maintenance, is
performed.
You are the only one who can ensure that your
machine receives the proper maintenance care. You
are a vital link in the maintenance chain.
Basic maintenance
Basic maintenance includes tasks which are part of
everyday operation. You are responsible to ensure
that these tasks are carried out according to the main-
tenance table. You only need minimal manual skills for
these tasks and most required tools are provided with
the machine.
Maintenance section
The maintenance section is not yet available
for this machine. We plan to implement it as
soon as possible. Consider this section as
advance information.
For your convenience, DentalCNC lists all basic main-
tenance tasks in the
tenance
section, you can see when the individual tasks
are due.
When you have marked a maintenance task as
complete, its time interval is reset and the list is
updated accordingly.
When you have performed a maintenance task,
mark it as complete in the
This will keep the list up-to-date.
Preventive maintenance
Preventive maintenance for this machine has to be
scheduled every 2 years, or after 2,000 operating
hours at the latest.
To schedule preventive maintenance, contact cus-
tomer service.
Where to get service?
Customer service is your main contact for all service
related questions. They will provide you with spare
parts, maintenance tips and they will perform
preventive maintenance for you on request.
Maintenance
section. In the
Maintenance
section.
Original Operating Instructions: R5
R5 – Maintenance and do-it-yourself
When your machine is delivered or installed, ask
the service technician for contact details for the
customer service team. We also recommend
scheduling the first preventive maintenance
appointment at this point to ensure your machine
gets proper maintenance.
Definition of wear parts
The machine and the extra equipment are warranted
for a period of 24 months or 2,000 operating hours,
whatever comes first. The warranty covers defects in
materials or fabrication as long as the regulations for
using the machine in all documents are followed.
Of course, the warranty also covers wear parts as long
as their failure cannot be attributed to the function-
related abrasion. The wear parts that are mentioned in
the maintenance table can already wear down within
the warranty period due to their normal function. The
average useful life of the wear parts can be seen in the
maintenance table.
Use these values to determine operating costs, to plan
your spare part stock as well as to create individual
maintenance and service plans.
Maintenance table
page 64

Main-
Version: 5/10/2019