VHF R5 Mode D'emploi D'origine page 11

R5 – Machine overview
Working chamber door
The working chamber door locks the working
chamber and protects the user from injuries during
operation.
The working chamber door is operated by electricity.
You can open and close the door with DentalCNC.
You cannot open the door when the machine is
switched off or while the axes are moving.
F . 3 – W
IG ORKING CHAMBER DOOR
Multi-purpose compartment
The multi-purpose compartment contains the
following components:
You can open the multi-purpose compartment via
DentalCNC and close it manually.
F
IG
INCLUDED
Original Operating Instructions: R5
Version: 5/10/2019
Cooling liquid tank
n
Blank magazine
n
Compressed air regulator
n
. 4 – T -
HE OPEN MULTI PURPOSE COMPARTMENT
)
1.
Blank magazine
2.
Cooling liquid tank
3.
Compressed air regulator
EN 11
(
DISCS NOT