Publicité
Les langues disponibles
Les langues disponibles
EN 26
a.
Language
Select the
corner.
b.
Select the button which is labeled with the
desired language.
9.
Device Server Configuration
Select the
10.
Configure using the setup utility (Recom-
Select the
mended)
button.
11.
If Windows
®
asks you whether Device Server
Setup may make changes to your computer,
[Yes]
select
.
A dialog window opens asking you whether you
want to add the application to the exception list
of the Windows
®
firewall.
12.
[Yes]
Select
.
Welcome to the Device Server
A window titled
Setup
opens.
13.
[Next]
Select
.
14.
Read the User License Agreement, and if you
[Yes]
agree, select
.
A list with all detected devices displays.
F
. 20 – S
IG
ELECTING THE DEVICE FROM THE LIST
15.
If more than 1 device is listed, switch off all other
machines and non-required network devices.
16.
Mark the correct entry.
Even if there is only 1 device listed, select
this device from the list to properly mark it
(
Fig. 20 – see above ). Otherwise, the
next configuration step may fail.
17.
[Next]
Select
.
18.
Specify the IP address of the machine:
a.
If a DHCP server is available in your net-
work, activate the
matically
option. Select
icon in the bottom right
button.
Get IP Address auto-
[Next]
.
Original Operating Instructions: R5
Version: 5/10/2019
R5 – Installing the machine
F
. 21 – C
IG
ONFIGURING THE MACHINE SO THAT IT
IP
RECEIVES ITS
ADDRESS FROM A
b.
If no DHCP server is available, activate the
Assign IP Address
meters manually. Select
IP Address
n
your CAM computer can reach. In
many cases, only the last segment
after the final dot may (and must) dif-
fer from the IP address of your com-
puter.
Subnet Mask
n
addresses the machine can reach
without a router. For many local area
networks,
rect value.
Default Gateway
n
of the desired router or access point.
F
. 22 – M
IG
ANUALLY CONFIGURING THE
THE MACHINE
Device Server Setup lists the network con-
figuration that you have specified so far.
19.
If the network configuration is correct, select
[Execute]
. Otherwise, select
the parameters as necessary.
Device Server Setup is complete. The application
asks you if you want to install additional software
(SX Virtual Link).
20.
Yes
[Next]
Activate
. Select
The SX Virtual Link installation program launches.
21.
In the installation program window, select the
desired language from the list.
DHCP
SERVER
option and enter the para-
[Next]
.
: Enter an IP address that
: Specify which IP
255.255.255.0
is the cor-
: Enter the IP address
IP
ADDRESS OF
[Back]
and correct
.
Publicité
