Hillrom Allen A-71100-CA Mode D'emploi page 71

INSTRUCTIONS FOR USE
3.2.20 Shut Down the Allen Advance Table
1. Level the Allen Advance Table and the support top "Level the Allen Advance Table
and the Support Top" on page 54.
2. Press and hold the lower control until the Allen Advance
Table is in its lowest position.
3. Hang the pendant and its cord on their holders.
4. Turn the Allen Advance Table off. This removes all power
from the Allen Advance Table.
5. Unplug the power cord from the facility power outlet, and
store the power cord on the Allen Advance Table.
NOTE: We recommend that you keep the Allen Advance Table plugged in when it is not
in use so that the batteries will stay charged. Know and follow your facility's protocol.
Document Number: 80028198
Version: F
Page 71
English
Issue Date: 03 FEB 2023
Ref Blank Template: 80025117 Ver. F