Hillrom Allen A-71100-CA Mode D'emploi page 54

INSTRUCTIONS FOR USE
2. Press and hold the applicable tilt control until the support
top is at the correct angle. When you release the control,
the support top will lock at that angle.
The tilt indicator on the display will show how far the
support top is tilted to the left or right.
3. To return the support top to the flat position, press and hold the opposite tilt control
until the top is no longer tilted. The tilt indicator on the display will be in the center of
the tilt indicator Area and the tilt level indicator will be green.
3.2.14 Level the Allen Advance Table and the Support Top
To determine if the Allen Advance Table is level, look at the display:
• The tilt level indicator will be green.
• The tilt indicator will be in the center of the tilt indicator
area.
WARNING:
Before you adjust the Allen Advance Table or use the tilt feature, make sure that
the brakes are locked, the patient is secured to the support top and is fully
prepared for the movement, and the Allen Advance Table is free of objects that
could interfere with the adjustment. Otherwise, patient fall, injury, or equipment
damage could occur.
1. Before you adjust the Allen Advance Table, make sure
that—
• The brakes are locked (the locked indicator on the
Allen Advance Table display is green).
• The patient is secured to the support top and is fully
prepared for the adjustment.
NOTE: We recommend that you use the two large security straps to secure the patient to
the support top.
• The Allen Advance Table is free of objects that could interfere with the
adjustment.
2. If the Allen Advance Table is in a Trendelenburg position, press and hold the opposite
Trendelenburg control until the lowered column is at the same height as the raised
column and the tilt level indicator on the display is green.
Document Number: 80028198
Version: F
Page 54
English
Issue Date: 03 FEB 2023
Ref Blank Template: 80025117 Ver. F