Hillrom Allen A-71100-CA Mode D'emploi page 37

INSTRUCTIONS FOR USE
f. Lift the end (A) of the flip handle until it locks in
position.
g. Push and hold the red safety lever (B) forward as you
pull the flip handle to the released or down position.
h. With the help of another person, turn the H-bracket on
each column so that it is toward the bottom of the
column.
i. Push the flip handle up to the locked position. You do
not need to press the red safety lever.
5. Determine which hole location on the H-bracket to install
the support top.
NOTE: The hole locations are numbered on the side of the H-
brackets.
WARNING:
Failure to use correct lifting methods could cause patient fall, injury, or equipment
damage.
Document Number: 80028198
Version: F
Page 37
English
Issue Date: 03 FEB 2023
Ref Blank Template: 80025117 Ver. F