Hillrom Allen A-71100-CA Mode D'emploi page 52

Les langues disponibles

INSTRUCTIONS FOR USE

NOTE: There are three activation surfaces on the lift trigger for ease of use. Use the

activation surface that is most comfortable to operate, based on your position and the

orientation of the table.

Raise or lower the patient support carriage to the correct height for the procedure.

Release the lift trigger and lower the patient support carriage until it locks in position.

The lift triggers will return to the locked position when the patient support carriage is

locked in position.

When the patient support carriage is in the lowest position, make sure that the patient

support carriage is locked in position. If necessary, move the patient support carriage

up until the patient support carriage is locked in position.

Put the Allen Advance Table in a Trendelenburg Position

Before you adjust the Allen Advance Table or use the tilt feature, make sure that

the brakes are locked, the patient is secured to the support top and is fully

prepared for the adjustment, and the Allen Advance Table is free of objects that

could interfere with the adjustment. Otherwise, patient fall, injury, or equipment

damage could occur.

Make sure that—

• The brakes are locked (the locked indicator on the

Allen Advance Table display is green).

• The patient is secured to the support top and is fully

prepared for the adjustment.

NOTE: We recommend that you use the two large security straps to secure the patient to

the support top.

• The Allen Advance Table is free of objects that could interfere with the

Observe lines closely during articulations. Always use good line management

techniques. Failure to do so could cause patient fall, injury, or equipment

Document Number: 80028198

Issue Date: 03 FEB 2023

Ref Blank Template: 80025117 Ver. F