Hillrom Allen A-71100-CA Mode D'emploi page 57

Les langues disponibles

INSTRUCTIONS FOR USE

Do not use the rail top with the prone support set without the cross pins installed

correctly through the prone bracket. To do so could cause patient fall, injury, or

equipment damage.

c. Make sure the drop lock on the end of the cross pin moves to the side to hold the

support top in position.

Look at the display, and make sure the tilt level indicator and the brakes locked

indicator are green.

Align the prone support pads with the patient's body. Refer to "Head Plate" on

page 48, "Chest Support" on page 48, "Hip and Thigh Supports" on page 46, and

"Supine Access Tops (A-70404)" on page 48 for placement procedures.

Use the Drawsheet to pull the patient towards the rail top with the prone support set.

Secure the Drawsheet to the rails. Refer to the instructions included with the

We recommend that a minimum of four caregivers are available to help rotate

the patient. The number of caregivers should be determined by the facility staff

for each rotation procedure. Failure to do so could cause patient fall, injury, or

equipment damage.

Document Number: 80028198

Issue Date: 03 FEB 2023

Ref Blank Template: 80025117 Ver. F