Hillrom Allen A-71100-CA Mode D'emploi page 33

Les langues disponibles

INSTRUCTIONS FOR USE

Battery Charge Level

If the batteries are not charged before you use the Allen Advance

Table, the Allen Advance Table may not function in an emergency

situation. Patient fall or injury could occur.

When the Battery Charge Level indicator shows a low level of charge or if you hear a

"beep" from the Allen Advance Table when you try to use the pendant controls, plug the

Allen Advance Table into an applicable power outlet to charge the batteries. To keep

the batteries charged, plug the Allen Advance Table into an outlet nightly and when you

store the Allen Advance Table.

NOTE: A "beep" from the Allen Advance Table lets you know that the battery charge

level is low or depleted.

NOTE: When the Allen Advance Table is not plugged in: the Battery Charge Level

indicator will be on when the On/Off switch is on; the Battery Charge Level indicator will

be off when the On/Off switch is off.

Potential Equalization Conductor

There is a plug on the Allen Advance Table and on the optional

Air Pump (see page 45) for you to connect an equipotential

bonding cable. This will equalize any potential difference when

the Allen Advance Table is to be used with a patient who has

intravenous, cardiac, or other medical equipment.

Lock and Unlock the Brakes

Do not press the Lock control while the Allen Advance Table is being moved.

Equipment damage could occur.

• Lock—press and hold the Lock control until the locked

indicator on the display is green.

• Unlock—press and hold the key control as you press the

unlock control until the unlocked indicator on the display is

Document Number: 80028198

Issue Date: 03 FEB 2023

Ref Blank Template: 80025117 Ver. F