Hillrom Allen A-71100-CA Mode D'emploi page 58

Les langues disponibles

INSTRUCTIONS FOR USE

Observe lines closely during articulations. Always use good line management

techniques. Failure to do so could cause patient fall, injury, or equipment

The lateral-to-prone assembly does not support the patient's head. A caregiver

must support the patient's head during the lateral-to-prone rotation and

maintain correct head position. Patient injury can occur.

Make sure of these, and then follow facility protocols to manually rotate the support

• There is a sufficient number of persons available for the patient to be rotated.

• Persons and equipment will not be in the way of the support tops when they

are rotated.

• To watch the lines so that they do not get pinched or caught during the

• The patient's head stays in the correct position during the rotation.

• At least one caregiver is in a position where he or she can hold on to the prone

surface and help it to lower gently.

Make sure that a caregiver relieves the weight from the flip handle mechanism.

Failure to relieve the weight can result in difficulty releasing the flip handle and

sudden movement of the lateral-to-prone configuration. Patient injury or fall and

equipment damage can occur.

Have a caregiver gently lift up on the rail top with prone support set to relieve the

weight from the flip handle mechanism. Relieving the weight will reduce the risk that

the mechanism will bind and suddenly release.

Document Number: 80028198

Issue Date: 03 FEB 2023

Ref Blank Template: 80025117 Ver. F