Hillrom Allen A-71100-CA Mode D'emploi page 53

Les langues disponibles

INSTRUCTIONS FOR USE

Press and hold the applicable Trendelenburg or Reverse

Trendelenburg control until the support top is at the

correct angle.

To return to the horizontal position, press and hold the opposite Trendelenburg control

until the lowered column is at the same height as the raised column.

NOTE: Near the bottom, on the outside of the columns, there

are numbers to help identify the height level.

Tilt the Support Top

NOTE: For bariatric patients, we recommend that you install three supine access tops

(A-70404) to help support the patient during the tilt procedure.

Before you adjust the Allen Advance Table or use the tilt feature, make sure that

the brakes are locked, the patient is secured to the support top and is fully

prepared for the movement, and the Allen Advance Table is free of objects that

could interfere with the adjustment. Otherwise, patient fall, injury, or equipment

damage could occur.

Make sure that—

• The brakes are locked (the locked indicator on the

Allen Advance Table display is green).

• The patient is secured to the support top and is fully

prepared for the adjustment.

NOTE: We recommend that you use the two large security straps to secure the patient to

the support top.

• The Allen Advance Table is free of objects that could interfere with the

Observe lines closely during articulations. Always use good line management

techniques. Failure to do so could cause patient fall, injury, or equipment

Document Number: 80028198

Issue Date: 03 FEB 2023

Ref Blank Template: 80025117 Ver. F