Hillrom Allen A-71100-CA Mode D'emploi page 41

INSTRUCTIONS FOR USE
Install a Patient Support on the Advance Pinless H-Bracket
WARNING:
Do not use the Allen® Lateral Top with the Advance Pinless H-Bracket. Injury or
equipment damage can occur.
1. Put the tilt control release in the unlocked position. Each
tilt control release will operate the other tilt control
release.
2. Move the bottom of the Advance Pinless H-Bracket
towards the column.
3. Raise the patient support so that the end is above the
patient support carriage.
4. Lower the patient support onto the patient support
mounting hooks. Make sure that the patient support
attachment hooks secure the patient support.
5. Put the tilt control release in the locked position.
Document Number: 80028198
Version: F
Page 41
English
Issue Date: 03 FEB 2023
Ref Blank Template: 80025117 Ver. F