Hillrom Allen A-71100-CA Mode D'emploi page 46

Les langues disponibles

INSTRUCTIONS FOR USE

Potential Equalization Conductor

There is a plug on the optional Air Pump for you to connect an

equipotential bonding cable. This will equalize any potential

difference when the Allen Advance Table is to be used with a

patient who has intravenous, cardiac, or other medical

Install the Prone Support Set (A-71300) on the Rail Top

The Prone Support Set includes one chest support, six hip supports (two each of small,

medium, and large), two thigh supports, one sling, and one head plate.

Do not use the sling with the Lateral-to-Prone assembly. The sling does not provide

sufficient patient support for a lateral-to-prone transfer. Patient injury or adverse

surgical outcome can occur.

The sling is intended to provide a support for the patient's legs. We recommend

that you use additional pressure reducing material between the patient's legs

and the sling to help prevent patient injury.

Lay the closed part of the sling over the support top rails.

Connect the buckles.

Adjust the straps as necessary for the amount of slack

you want in the sling.

Hip and Thigh Supports

NOTE: The thigh supports are side specific.

NOTE: For use with the Lateral-to-Prone assembly, only use small and medium sized hip

Document Number: 80028198

Issue Date: 03 FEB 2023

Ref Blank Template: 80025117 Ver. F