Hillrom Allen A-71100-CA Mode D'emploi page 32

INSTRUCTIONS FOR USE
You will find the retract/extend handle at the center of the cross tube.
Lift the retract/extend handle to adjust the overall
length of the table from 82.25" to 109" (208.9 cm to
276.9 cm). Lower the handle to lock the cross tube
in position.
3.2.2 Turn the Unit On and Off
1. Make sure the flip handle is in the up and locked
position.
2. Plug the power cord into the Allen Advance
Table outlet and into an applicable power outlet.
NOTE: When the Allen Advance Table is plugged in,
the Power indicator will be on.
3. Press the On/Off switch to the applicable position:
• I = On
• O = Off
NOTE: When the On/Off switch is on and the Allen Advance Table is not plugged into a
power outlet, the Allen Advance Table operates on battery power. Battery power is for
short term use only and should be used for emergency power situations only.
Document Number: 80028198
Version: F
Unlocked:
Locked:
Page 32
English
On/Off Switch
Issue Date: 03 FEB 2023
Ref Blank Template: 80025117 Ver. F