Parker AC30 Série Mode D'emploi page 475

Parameter Name No.
Short Overload Level 0346
Overload value in % of the stack amps for short overload condition(*)
Short Overload Time 0347
Maximum duration under short overload condition (typically 3s)
Inv Time Aiming Point 0348
Current in % where the power stack can undertake the load current permanently
Inv Time Output 0349
Actual output current limit as a % of the stack current
Inv Time Up Rate 0350
Ramp value to ramp up current when overload condition disappears
Inv Time Down Rate 0351
Ramp value to reach the aiming point under prolonged overload condition
Inv Time Warning 0352
The protection starts to integrate overload conditions
AC30 series Variable Speed Drive
Path
Parameters::Motor Control::Stack Inv
Time
Parameters::Motor Control::Stack Inv
Time
Parameters::Motor Control::Stack Inv
Time
Parameters::Motor Control::Stack Inv
Time
Parameters::Motor Control::Stack Inv
Time
Parameters::Motor Control::Stack Inv
Time
Parameters::Motor Control::Stack Inv
Time
Parameter Reference
Default Range
x. 0 to 200
0.000 to 10000.000
105.00 0.00 to 125.00
x. 0 to 600
5.000 0.000 to 120.000
5.000 0.000 to 120.000
D-189
Units Writable
NEVER
%
s NEVER
ALWAYS
%
% NEVER
STOPPED
s
s STOPPED
NEVER