Setup Wizard - Parker AC30 Série Mode D'emploi

Setup Wizard

Parameters::Device Manager::Setup Wizard
These parameters configure the operation of the Setup Wizard.
Parameter Name No.
1738
Enable Auto Save
Control how parameter values are saved when modified via the GKP or the Web Page.
TRUE: Parameter values are saved automatically when they are entered.
FALSE: Parameter values are not saved automatically. To save parameters using the GKP navigate to the Welcome page by
pressing the soft left key repeatedly, then press the save icon
active and unlocked it will be necessary to lock the GKP password before the save icon is presented).
1779
Auto Hide
In normal operation, parameters that are not relevant to the configuration are saved. For example, parameters relating to the
Thermistor IO option are only visible when that option is enabled. Clearing "Parameter Auto Hide" shows all parameters in the drive at
ENGINEER view level. At other view levels the Auto Hide feature is always enabled.
Language 1005
Identifies the currently selected language, refer to chapter 7, Graphical Keypad, for details on changing the selected language.
Run Wizard? 1006
Changing this parameter to TRUE will cause the GKP to re-start the Setup Wizard. This parameter is automatically reset to FALSE on
exiting the Setup Wizard.
Functional Description
The operation of the Setup Wizard is described in Chapter 9.
AC30 series Variable Speed Drive
Path
Parameters::Device Manager::Setup
Wizard
Parameters::Device Manager::Setup
Wizard
Parameters::Device Manager::Setup
Wizard
Parameters::Device Manager::Setup
Wizard
Parameter Reference
Default Range
TRUE
for approximately 1s. (Note: If the GKP password is
TRUE
0:ENGLISH
0
1:FRANCAIS
2:DEUTSCH
3:ESPANOL
4:ITALIANO
5:CHINESE
6:L 6
7:L 7
8:L 8
9:CUSTOM
1 0:NO
1:YES
D-171
Units Writable
ALWAYS
ALWAYS
ALWAYS
ALWAYS