Parker AC30 Série Mode D'emploi page 221

A-19
Fieldbuses
Using a CoDeSys Based PLC
The example in this section uses the default parameter mapping of the inverter described under Parameter Mapping in the Inverter Configuration
section above:
Input Mapping Table
000 0627 Comms Control Word
001 0681 Comms Reference
002 0000
A CoDeSys (V3.5 SP10) soft PLC running on a PC is used.
1. Start a new project from CoDeSys using a CODESYS Control Win V3 device.
2. From the CoDeSys menu select Tools->Device Repository... and install the AC30 EDS file. The device will appear under Fieldbuses as
shown.
Output Mapping Table
Data Type Bytes
000
WORD 2
001
REAL 4
002
Data Type
0661 Status Word WORD
0395 Actual Speed Percent REAL
0000
AC30 series Variable Speed Inverter
Bytes
2
4